SOAP FINISH KIT

1. Use liquid C for the surfaces with dirt. Wash off the dirt using a sponge into which a sufficient amount of liquid C is absorbed. Sponge liquid C remaining on the surfaces.
2. Sand the surfaces with sandpaper (#180) in advance to prepare the surfaces. Remove sanding dust with a clean waste cloth.
3. Apply liquid A to the surfaces with a sponge or brush. Liquid A contains detergent components that are the bases for the soap coating. As puddles of the liquid generate stains, wipe off any excess liquid carefully with a waste cloth. After letting the liquid dry for approximately two hours, remove the fuzz from the surfaces with sandpaper (#400) and wipe off the sanding dust completely.
4. Finally, apply liquids A and B in the same manner. Liquid B contains oil components for the finish. As puddles of the liquids generate stains, wipe off any excess liquids carefully with a waste cloth. After letting them dry for approximately two hours, remove the fuzz from the surfaces with sandpaper (#1000) and wipe off the sanding dust completely.

If the surfaces are maintained partially, the maintained portions turn white to cause apparent color unevenness. Perform maintenance of the entire surfaces or note in advance that color unevenness may occur as a result of partial maintenance.

- This finish cannot prevent adhesion of dirt completely. If dirt and fingerprints adhere to the surfaces, perform maintenance (Recommendation: Use liquid C of this).
- As this finish is less water repelling than other finishes, wiping the surfaces with a damp cloth may make them fuzzy or rough. In such a case, sand them with sandpaper and apply liquids A and B in turn. Basically, wiping with a dry cloth rather than a damp cloth is recommended.
- If possible, do not set up furniture in places near heat-radiating devices and air-conditioner vents, as well as places exposed to direct sunlight (ultraviolet light), which could cause breakage and warpage of wood materials.

The tax amount, VAT rate, and duty rate vary from 5% to 20%, depending on the country. 

Payment of duties

Import VAT, and other taxes associated with the importation of the purchased product will be communicated to you by the courier at customs clearance via email or on your registered telephone number. Depending on where you live, you may have to pay at the time of delivery to your address.

Estimated delivery time

All products are order-made and carefully processed, assembled, and finished by our craftsmen in Japan.

Regarding the tableware and small products, we ship the goods within 7 days if we have stocks. If there is no available stock, we will accordingly inform you the lead time of the production.

For large quantities we will contact you.

For any further information, please contact us.